Please see the steps below to complete an inspection on the Safety Reports Inspections module within our All In One App:
Click into the Safety Reports All in One App
Log in to your Inspections module
Either click the Start New button or select an inspection from the Inspection list
Based on the Inspections Checklist that was assigned to this inspection you will have categories to follow and complete with a rating of Poor, Fair, or Good.
These ratings will update based on the Inspection Items score within each category.
Fill out any category that is applicable to the inspection you are completing. Please note: For scoring purposes, it is based on the total number of inspection items(questions) answered.
For example: If there were 10 total inspection items answered and 9 were positive it would be a 90% score overall. Only inspection items answered (either yes or no) are counted toward the overall score.
Under each category you will see a list of Inspection Items that can be checked.
Select either YES or NO next to each item that is applicable to the inspection.
If you check YES, you can do the following but it is not required:
Add Pictures by clicking the Camera box or the Gallery box
Add an Instance
The add instance allows an Inspector to make multiple observations on the same inspection item.
For example: If the inspection item is PPE worn, the Inspector could have seen 3 people wearing PPE(positive) and 2 people not(negative). They can add an instance of each one of those to give credit for all the good 'and' bad they saw for the same inspection item.
Add Notes on the specific scenario and mark the note as important.
Additionally you can view recommendations for the situation, by clicking the hyperlink.
Once you have, if you have, completed this you can click the Update Box
If you check NO, you can do the following but it is not required:
Add Pictures by clicking the Camera box or the Gallery box
Add an Instance*(see definition and example above in step 7)
Add Notes on the specific scenario and mark the note as important.
Confirm whether it was immediately corrected or not by checking or leaving the box next to Immediately Corrected blank
Add a Severity Rating
Add a Contributing Factor
Additionally, you can view recommendations for the situation, by clicking the hyperlink.
Responsible Parties
Can only be added if a responsible party is set up prior to the inspection.
Adding a responsible party can only be done on the admin side.
Once you have, if you have, completed this you can click the Update Box
Click Submit after completing the YES or NO steps above:
Clicking submit will trigger you to complete the next steps:
Leave the box next to your email checked if you to send a copy of this inspection to yourself
If you do not want a copy of this sent to you please uncheck this box and only check the Company Contact box.
Leave the box next to your company contact email checked if you need to send a copy of this inspection to them.
If you do not need a copy sent there, please uncheck this box
If you are the company contact and the one completing the inspection then leave both boxes checked and you will only get one copy of the inspection.
If applicable, add a list of CCs by filling in their email addresses
If applicable, Add any email comments by typing the notes in
If applicable, Attach any safety docs that were used by clicking the plus sign
If this needs to be a priority. check the box next to Send as High Priority Email
If you would like to preview the report, you can click the Preview Report Button, otherwise click Submit Report
Related Articles: